How to Flash Samsung Clone S10 Lite MT6580 8.0 Firmware
If you are looking for a way to install the latest Android 8.0 Oreo firmware on your Samsung Clone S10 Lite device, then you have come to the right place. In this article, we will show you how to flash the Samsung Clone S10 Lite flash file MT6580 8.0 using the SP Flash Tool.
The Samsung Clone S10 Lite is a clone of the original Samsung Galaxy S10 Lite smartphone, which features a 6.7-inch display, a Snapdragon 855 processor, 8GB of RAM, and 128GB of internal storage. The clone device, however, has a lower-end MediaTek MT6580 chipset, 2GB of RAM, and 16GB of storage. It also runs on a custom Android 8.0 Oreo ROM that mimics the Samsung One UI interface.
Flashing the Samsung Clone S10 Lite flash file MT6580 8.0 can help you fix various issues on your device, such as bootloop, stuck on logo, virus infection, IMEI invalid, etc. It can also help you upgrade or downgrade your firmware version, or restore your device to its factory settings.
Samsung Clone S10 Lite Flash File MT6580 8.0 | Firmware | Rom
Requirements for Flashing Samsung Clone S10 Lite Flash File MT6580 8.0
Before you proceed with the flashing process, you need to prepare some things first. Here are the requirements for flashing the Samsung Clone S10 Lite flash file MT6580 8.0:
A Windows PC or laptop.
A USB cable to connect your device to the PC.
A backup of your personal data on your device, as flashing will erase everything.
A fully charged battery on your device, or at least 50%.
The Samsung Clone S10 Lite flash file MT6580 8.0 firmware package. You can download it from here.
The SP Flash Tool software. You can download it from here.
The MediaTek USB VCOM drivers. You can download them from here.
Steps to Flash Samsung Clone S10 Lite Flash File MT6580 8.0
Once you have all the requirements ready, you can follow these steps to flash the Samsung Clone S10 Lite flash file MT6580 8.0:
Extract the Samsung Clone S10 Lite flash file MT6580 8.0 firmware package and the SP Flash Tool software on your PC.
Install the MediaTek USB VCOM drivers on your PC.
Launch the SP Flash Tool software as administrator.
Click on the \"Download\" tab and then click on the \"Choose\" button next to the \"Scatter-loading File\" option.
Browse and select the scatter file from the extracted firmware folder. It should be named \"MT6580_Android_scatter.txt\".
Make sure all the partitions are checked and then click on the \"Download\" button.
Power off your device and remove the battery if possible.
Connect your device to the PC via USB cable while holding the volume down or volume up button.
The SP Flash Tool will detect your device and start flashing the firmware.
Wait for the flashing process to complete. It may take a few minutes.
Once done, you will see a green tick mark on the SP Flash Tool screen.
Disconnect your device from the PC and insert the battery if removed.
Power on your device and enjoy the new firmware.
In this article, we have shown you how to flash the Samsung Clone S10 Lite flash file MT6580 8.0 using the SP Flash Tool software. This method is easy and safe to follow, but make sure you follow all the instructions carefully and backup your data before flashing. If you have any questions or 0efd9a6b88